| |
| |
 |
| |
|
Charlotte, N.C., January 6, 2009 – An easy-to-use brush for cleaning sleeve bores is the latest innovation from HarperScientific™, the printing and coating supplies division of global anilox supplier Harper Corporation of America.
The new EZ-BORE™ Bore Cleaner Brush simplifies maintenance of anilox and plate sleeves and makes sleeve mounting and demounting from a press print station easier.
Supplied as a kit, the EZ-BORE™ Bore Cleaner Brush features an aluminum anodized handle with special grip, a customer-specified brush in 4-, 5-, 6-, 7- or 8-inch diameters and foam pads in diameters ranging from 5 to 8 inches.
When supplied new, mandrels are designed for minimal expansion by air and compression of its foam layer to assure hassle-free sleeve installation along their full length. Clean, ink-free components are essential to an efficient process.
In addition, bore cleaning protects a sleeve from damage caused by the buildup of ink at each of the sleeve’s ends. Dried ink can cause a sleeve to be “glued” to the mandrel. Even a slight amount of ink on a sleeve’s inner liner can alter the sleeve’s inner diameter. That change can tighten up the sleeve and increase sliding friction, complicating installation.
HarperScientific™ supplies brushes, sleeve covers, padded and non-padded roll covers, cleaners, ink proofers, sponges, chip fixing products and more to the worldwide anilox market.
For further information, please contact Jazmin Kluttz at 704-588-3371 or jkluttz@harperimage.com
|
